09-09-2008 08:08 AM - edited 03-06-2019 01:16 AM
I have a 2611 router that will boot, but when it get's to..Press Return to get started! It just hangs..?? I have an alarm light on the router and the router was once an Internet ISP router. What do I need to do to access the router.
Thanks,
Solved! Go to Solution.
09-09-2008 08:35 AM
It looks that you have some configuration on the router which is causing the router to lock as soon as it loads the configuration.
The best you can do is to boot the router so that it ignores the configuration. To do that press 'Ctrl+Break' while the router is booting up to go into ROMMON. Once you are there type the command 'confreg 0x2142' & then use the 'boot' command to boot it up.
Hope that helps!!
09-09-2008 08:35 AM
It looks that you have some configuration on the router which is causing the router to lock as soon as it loads the configuration.
The best you can do is to boot the router so that it ignores the configuration. To do that press 'Ctrl+Break' while the router is booting up to go into ROMMON. Once you are there type the command 'confreg 0x2142' & then use the 'boot' command to boot it up.
Hope that helps!!
09-09-2008 09:20 AM
The router appears to be ignoring the 'Ctrl+Break' function(using a laptop(cntrl+c)..?? . The laptop has the 'Ctrl+Break' function requiring a function key along with the 'Ctrl key. Any iother ideas?
09-10-2008 02:14 AM
Try using a different terminal program.
TeraTerm is very good and free.
http://hp.vector.co.jp/authors/VA002416/ttermp23.zip
alt-b is the break sequence.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide