cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
384
Views
0
Helpful
1
Replies
Highlighted
Beginner

2800 Bridge MIB

Is it possible to get module information from a 2811?

My ISO is, Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(21)

RELEASE SOFTWARE (fc1).

My 2811 has both a 9 port and 16 port module. When I do a snmpwalk I get the following.

"snmpwalk -c somecommunity -v2c someswitch 1.3.6.1.4.1.9.5.1.3.1.1.2"

SNMPv2-SMI::enterprises.9.5.1.3.1.1.2 = No Such object avaliable on this agent at the OID

All the other routers on my network list fine?

1 REPLY 1
Highlighted
Frequent Contributor

Cisco network modules are available in the following four different form factors to provide greater modularity and functionality for users:

Single-wide network modules, also called NM or NME

Extended single-wide network modules, also called NME-X

Double-wide network modules, also called NMD

Extended double-wide network modules, also called NME-XD

Single-wide network modules are installed in fixed network module slots on Cisco 2600 , 2811, 3600,3700,3800 series

http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/installation/guide/OvrNetM.html#wp1067608

Content for Community-Ad