01-29-2022 03:46 PM
Hi,
I just factory reset my router and when I go to power it on I do not see anything load up on putty. Not sure how to fix this I appreciate any help.
Thank you!
Solved! Go to Solution.
01-29-2022 04:21 PM - edited 01-29-2022 04:22 PM
Make sure its connected to right port ( i am sure you do, just clarifying)
Hope the device is powered on, Can you confirm the Green Lights in front, then try to get another Console cable or try with another PC.
01-29-2022 04:06 PM
Double check console port settings.
01-29-2022 04:17 PM
Thanks for your reply. Just checked and the port settings are set to 9600, 8, 1 None and None
01-29-2022 04:21 PM - edited 01-29-2022 04:22 PM
Make sure its connected to right port ( i am sure you do, just clarifying)
Hope the device is powered on, Can you confirm the Green Lights in front, then try to get another Console cable or try with another PC.
01-29-2022 04:30 PM
Wow lol I actually reached back and took a closer look and noticed I had actually plugged it into the AUX port. Thanks a lot for your help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide