02-07-2014 05:01 AM - edited 03-07-2019 06:04 PM
We're trying to set up the internal DHCP server in the 2960.
What we want to achieve is that the same port always gets the same ip address, regardless of which equipment is connected.
Port 0/1 always recieves address .11, port 0/2 address .12 and so on.
How can this be achieved? Is it possible by using the internal DHCP or do we need an external one?
The switch software version is 15.0(2r)SE and the hardware is WS-C2960S-F24PS-L.
02-07-2014 05:10 AM
This document may help:
http://blog.ine.com/2009/07/22/understanding-dhcp-option-82/
HTH,
John
*** Please rate all useful posts ***
02-07-2014 06:06 AM
Hi,
I think this is what you need
Regards
Alain
Don't forget to rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide