12-02-2012 12:17 PM - edited 03-07-2019 10:21 AM
Is it possible to obtain a replacement rackmount kit for a 2960 48 port switch? I've had a read of the manuals but can't see a part number specified. The part number suggested to me (by BT) is for the 8 port version, which is not much use.
Thanks.
Solved! Go to Solution.
12-02-2012 01:10 PM
Here is the part number:
RCKMNT-1RU=.
More info here:
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/hardware/installation/guide/higinstl.html
http://www.cablesandkits.com/cisco-2960-series-catalyst-rack-mount-kit-p-198.html
HTH
12-02-2012 01:10 PM
Here is the part number:
RCKMNT-1RU=.
More info here:
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/hardware/installation/guide/higinstl.html
http://www.cablesandkits.com/cisco-2960-series-catalyst-rack-mount-kit-p-198.html
HTH
12-02-2012 02:53 PM
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: