cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1568
Views
0
Helpful
1
Replies
marc_cousineau
Beginner

2960 support multiple vlan per port

We're going to be switching some of our gear from Foundry to Cisco, and were looking at the WS-C2960S-48TS-L.  We currently have 3 different VLAN's, and I wanted to have 1 uplink back to our firewall (ASA 5550) and then let the firewall do the routing between the subnets.  I realize that 1 link will carry the traffic twice then, but is that possibly with those switches to have all three vlans assigned to one port and then just let the firewall do the routing between the vlans or would I need to have 3 uplink ports back to the 5550?

Thanks!

1 REPLY 1
Jeremy Halcomb
Beginner

You can configure the one link as a trunk port and it will carry all the VLANs on that single link up to the ASA. The traffic would be going through the link twice only for intraVLAN connectivity.

Sent from Cisco Technical Support iPhone App