cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3813
Views
0
Helpful
8
Replies

2960S booting issues after 15.2(1)E IOS upgrade.

sifurobbie
Level 1
Level 1

Hello all,

I have a Cisco 2960S-48LPS which was loaded with the IOS c2960s-universalk9-mz.152-1.E.bin via xmodem using Tera Term. I can see the IOS in the flash directory fine and then issue the set BOOT flash:c2960s-universalk9-mz.152-1.E command. It seems the IOS loads but I get a display of strange characters when I am expecting to see the switch prompt. These are the steps I used. Has anyone come across this before and resolved the issue?

Many thanks in advance.

switch: copy xmodem: flash:c2960s-universalk9-mz.152-1.E.bin

Begin the Xmodem or Xmodem-1K transfer now...

C.........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

File "xmodem:" successfully copied to "flash:c2960s-universalk9-mz.152-1.E.bin"

switch:

switch:

switch:

switch:

switch: set BOOT flash:c2960s-universalk9-mz.152-1.E.bin

switch: unset BAUD

switch:

switch:

switch: boot

Loading "flash:c2960suniversalk9mz.152-1.E.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

File "flash:c2960s-universalk9-mz.152-1.E.bin" uncompressed and installed, entry point: 0x3000

executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.2(1)E, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2013 by Cisco Systems, Inc.

Compiled Tue 27-Aug-13 11:59 by prod_rel_team

Initializing flashfs...

Using driver version 3 for media type 1

mifs[4]: 12 files, 1 directories

mifs[4]: Total bytes     : 1806336

mifs[4]: Bytes used      : 755200

mifs[4]: Bytes available : 1051136

mifs[4]: mifs fsck took 0 seconds.

mifs[4]: Initialization complete.

mifs[5]: 0 files, 1 directories

mifs[5]: Total bytes     : 3870720

mifs[5]: Bytes used      : 1024

mifs[5]: Bytes available : 3869696

mifs[5]: mifs fsck took 0 seconds.

mifs[5]: Initialization complete.

mifs[6]: 5 files, 1 directories

mifs[6]: Total bytes     : 258048

mifs[6]: Bytes used      : 9216

mifs[6]: Bytes available : 248832

mifs[6]: mifs fsck took 0 seconds.

mifs[6]: Initialization complete.

mifs[7]: 5 files, 1 directories

mifs[7]: Total bytes     : 258048

mifs[7]: Bytes used      : 9216

mifs[7]: Bytes available : 248832

mifs[7]: mifs fsck took 1 seconds.

mifs[7]: Initialization complete.

mifs[8]: 4 files, 1 directories

mifs[8]: Total bytes     : 57931776

mifs[8]: Bytes used      : 16497152

mifs[8]: Bytes available : 41434624

mifs[8]: mifs fsck took 0 seconds.

mifs[8]: Initialization complete.

...done Initializing flashfs.

Checking for Bootloader upgrade..

Boot Loader upgrade not required (Stage 2)

FIPS: Flash Key Check : Begin

FIPS: Flash Key Check : End, Not Found, FIPS Mode Not Enabled

POST: MA BIST : BeginYeti2S88gMdioWr: Unknown status for write operation, data = 0

***ERR: S88G FC 1   MBIST Unload Activity

***ERR: S88G FC 1   MBIST failed

Yeti2S88gMdioWr: Unknown status for write operation, data = 0

***ERR: S88G DP Sg1 MBIST Unload Activity

***ERR: S88G DP Sg1 MBIST failed

Yeti2S88gMdioWr: Unknown status for write operation, data = 0

***ERR: S88G DP Xg1 MBIST Unload Activity

***ERR: S88G DP Xg1 MBIST failed

Yeti2S88gMdioWr: Unknown status for write operation, data = 0

***ERR: S88G NI 1   MBIST Unload Activity

***ERR: S88G NI 1   MBIST failed

Yeti2S88gMdioWr: Unknown status for write operation, data = 0

***ERR: S88G FC 0   MBIST Unload Activity

***ERR: S88G FC 0   MBIST failed

Yeti2S88gMdioWr: Unknown status for write operation, data = 0

***ERR: S88G DP Sg0 MBIST Unload Activity

***ERR: S88G DP Sg0 MBIST failed

Yeti2S88gMdioWr: Unknown status for write operation, data = 0

***ERR: S88G DP Xg0 MBIST Unload Activity

***ERR: S88G DP Xg0 MBIST failed

Yeti2S88gMdioWr: Unknown status for write operation, data = 0

***ERR: S88G NI 0   MBIST Unload Activity

***ERR: S88G NI 0   MBIST failed

Yeti2S88gMdioWr: Unknown status for write operation, data = 0

***ERR: S88G UPB    MBIST Unload Activity

***ERR: S88G UPB    MBIST failed

Yeti2S88gMdioWr: Unknown status for write operation, data = 0

POST: MA BIST : End, Status Passed

POST: TCAM BIST : Begin

POST: TCAM BIST : End, Status Passed

extracting front_end/front_end_ucode_info (86 bytes)

Waiting for Stack Master Election...

POST: Inline Power Controller Tests : Begin

POST: Inline Power Controller Tests : End, Status Passed

POST: Thermal, Fan Tests : Begin

POST: Thermal, Fan Tests : End, Status Passed

POST: PortASIC Stack Port Loopback Tests : Begin

POST: PortASIC Stack Port Loopback Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin

POST: PortASIC Port Loopback Tests : End, Status Passed

POST: EMAC Loopback Tests : Begin

POST: EMAC Loopback Tests : End, Status Passed

Election Complete

Switch 1 booting as Master

Waiting for Port download...Complete

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C2960S-48LPS-L (PowerPC) processor (revision G0) with 131072K bytes of memory.

Processor board ID FOC1724W3KY

Last reset from power-on

1 Virtual Ethernet interface

1 FastEthernet interface

52 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address       : EC:E1:A9:4B:2D:80

Motherboard assembly number     : 73-11907-09

Power supply part number        : 341-0393-02

Motherboard serial number       : FOC172276VR

Power supply serial number      : LIT171907G8

Model revision number           : G0

Motherboard revision number     : A0

Model number                    : WS-C2960S-48LPS-L

Daughterboard assembly number   : 73-11933-04

Daughterboard serial number     : FOC1724266X

System serial number            : FOC1724W3KY

Top Assembly Part Number        : 800-30937-04

Top Assembly Revision Number    : A0

Version ID                      : V04

CLEI Code Number                : COMGZ00ARD

Daughterboard revision number   : A0

Hardware Board Revision Number  : 0x01

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    1 52    WS-C2960S-48LPS-L  15.2(1)E              C2960S-UNIVERSALK9-M

tqÛHZkdA»;y$6°Z¡`2p[?[$Û3&Z[8ÿ6

                               ÓÍEZ%;¹`mÐs«#SÉ[®0+d¤mV²KÚ+?Y8¡ã717ArtÌÞx6"d·B´ì6·¹ðónb³8CSÜvKg, d[o0l

                                                                                                     Z³

8 Replies 8

paolo bevilacqua
Hall of Fame
Hall of Fame

Wrong forum, post in "LAn and switching". You can move your posting with the Actions panel on the right.

Hi.

After boot try to change console speed at 115200

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"

Thank you Carlo, but have already tried using the BAUD rate of 115200 and 9600. Don't understand how the strange characters appear after what seems to be a normal boot up of the IOS.

Hi.

Have you also tryed to rename the config in switch: mode so that it can boot with default config?

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"

Hi Carlo,

I don't want to start presuming what you mean, please could you clarify what you mean? As far as I can see in the flash directory, there is the ios, a config.text and a private-config.text.

Hi

I meant... on switch mode (at prompt switch:) rename config.text in config.old so that switch can boot without a config.

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"

Hi Carlo, will give that a try.

Hi Carlo,

I managed to rescue the switch. I deleted the flash that was already on there (just in case it didn't copy over first time properly) and repeated the xmodem procedure again, but using the BAUD rate of 9600, instead of 115200 as recommended on some searches I found. Although it was painfully slow transfering the file, it solved the problem.

Thank you for your tips though, much appreciated.

Best,

Rob

Review Cisco Networking products for a $25 gift card