3 vlan in the same physical port

[habouzyad]

hello,

i want ask if there is possible to affect a port in the switch to the 3 vlans ( one vlan voice and two vlan data)?

tahnks

[lee.reade]

Hi,

If you make the port trunk port, then it can carry up to 4096 vlans, if its an 802.1q trunk port.

Check out..

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/layer2.html

HTH

LR

[Giuseppe Larosa]

Yes,

you should use the following: (example)

int gix/y

switchport trunk enc dot1q

switchport mode trunk

switchport trunk allowed vlan 10,20,30

switchport voice vlan 10

Hope to help

Giuseppe