04-04-2012 12:56 PM - edited 03-07-2019 05:58 AM
I have a 3560-24ps, and I'm having issues with it booting. When I power the device up all the front panel lights come on like normail, and then the system light starts flashing like normal, but after 5 - 6 seconds the system light goes off. I don't get any output from the console, and the fans still run. Anyone have any ideas?
Thanks,
Doug
04-04-2012 03:31 PM
Can you please post the entire bootup process?
04-04-2012 07:30 PM
It doesn't even begin the boot process. When powered on the Led's all come on then the system light blinks for a few seconds then turns off. During this process I do not get any output on the console
Thanks!
04-04-2012 08:42 PM
Can you try other clients?
04-05-2012 04:34 AM
If you get no input from the console then RMA it . You should get input from the console from the moment it is plugged in.
04-05-2012 07:24 AM
I didn't try other clients as it works on other devices. This switch was pulled from a production environment and shelved for a month Rand now nothing. I was hoping that it was something such as the psu. My employer gave me the switch since it was dead thus there is no smartnet to get the rma under.
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide