04-20-2012 12:57 AM - edited 03-07-2019 06:14 AM
Cisco 3560 does not support "set ip next-hop verify-availabilty". I need this command in my config. "set ip next-hop" do not do the same job.
What can i do?
any other related command in replace of it?
04-20-2012 02:00 AM
Hi There,
It does support it, I have it on my 3560G.
What version of code are you running?
Dan
04-20-2012 02:14 AM
SW version 12.2.(50)SE3
Sw image C3560-IPSERVICESK9-M
and switch hardware 3560v2
04-20-2012 03:21 AM
ok, upgrade to the following as you can see that it is supported on my 3560G
route-map PBR-Management permit 30
match ip address Route-Map-ACL-Management-Process3
set ip next-hop verify-availability 10.11.120.161 1 track 30
Cisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(58)SE2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 21-Jul-11 01:44 by prod_rel_team
ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)
SL-Cisco-3560G-SW uptime is 12 hours, 36 minutes
System returned to ROM by power-on
System image file is "flash:c3560-ipservicesk9-mz.122-58.SE2.bin"
04-20-2012 04:10 AM
Yes in my ios there is also this config shown. But when i insert another sequence like
"route-map PBR-Management permit 40", debug says unsupported.
Do you have many sequence with the same name. Like
route-map PBR-Management permit 30
route-map PBR-Management permit 40
route-map PBR-Management permit 50
And is it running correctly?
And also this link says set ip next-hop verify-availability is not supported.
04-20-2012 04:13 AM
yes I do jave the sequence, as shown below - one problem I am having is getting the route map on the interface as it allows the command but doesnt show the route map in the config.
route-map PBR-Management permit 10
match ip address Route-Map-ACL-Management-Process1
set ip next-hop verify-availability 10.11.120.161 1 track 610
!
route-map PBR-Management permit 20
match ip address Route-Map-ACL-Management-Process2
set ip next-hop verify-availability 10.11.120.161 1 track 620
!
route-map PBR-Management permit 30
match ip address Route-Map-ACL-Management-Process3
set ip next-hop verify-availability 10.11.120.161 1 track 630
!
route-map PBR-Management permit 40
match ip address Route-Map-ACL-Management-Information
set ip next-hop verify-availability 10.11.120.161 1 track 640
!
route-map PBR-Management permit 50
match ip address Route-Map-ACL-Management-Supervisory
set ip next-hop verify-availability 10.11.120.161 1 track 650
route-map PBR-Management permit 10
match ip address Route-Map-ACL-Management-Process1
set ip next-hop verify-availability 10.11.120.161 1 track 610
!
route-map PBR-Management permit 20
match ip address Route-Map-ACL-Management-Process2
set ip next-hop verify-availability 10.11.120.161 1 track 620
!
route-map PBR-Management permit 30
match ip address Route-Map-ACL-Management-Process3
set ip next-hop verify-availability 10.11.120.161 1 track 630
!
route-map PBR-Management permit 40
match ip address Route-Map-ACL-Management-Information
set ip next-hop verify-availability 10.11.120.161 1 track 640
!
route-map PBR-Management permit 50
match ip address Route-Map-ACL-Management-Supervisory
set ip next-hop verify-availability 10.11.120.161 1 track 650
04-20-2012 04:21 AM
same problem with me i think.
I have also do these. But when show running config, there is no ip policy route-map command. And when typing show ip policy it is blank.
when you connect via serial port, and open the "debug ip policy" and set another sequence to the PBR-Management
you have also see unsupported messaage.
04-20-2012 05:00 AM
any update daniel
04-23-2012 11:55 AM
anyone help me?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide