Hi all,
I am recycling a WS-C3560G-48TS. Loaded our standard config. When I reload or it times out, it takes me to the "
Press RETURN to get started!" prompt. I don't think it is the image but plan on upgrading the image.
Current image is 12.2(35)SE5
boot looks okay:
myswitch# sh boot
BOOT path-list : flash:c3560-ipbase-mz.122-35.SE5/c3560-ipbase-mz.122-35.SE5.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
I need to ensure the switch reboots correctly in the event of power outage, etc... as no one can readily press enter.
Suggestions?
Thanks,
Robin
