11-27-2012 06:47 AM - edited 03-07-2019 10:16 AM
Can 3560-X support RSPAN with VACL configuration on the single switch, like in the following example:
vlan 100
remote-span
!
interface GigabitEthernet4/5
description Monitor Port
no ip address
!
interface Vlan10
ip address 10.10.10.1 255.255.255.0
!
interface Vlan100
description RSPAN VLAN
no ip address
shutdown
!
ip access-list extended TCP-TRAFFIC
permit tcp any any range 5000 6000
!
vlan access-map RSPAN-VACL 10
match ip address TCP-TRAFFIC
action forward
!
vlan filter RSPAN-VACL vlan-list 100
!
monitor session 1 source vlan 10
monitor session 1 destination remote vlan 100
!
monitor session 2 source remote vlan 100
monitor session 2 destination interface Gi4/5
11-28-2012 07:16 AM
Hi,
VLAN maps are not supported on switches running the LAN base feature set and it is supported only on IP base and IP services
Refer:
Regards,
Aru
*** Please rate if the post is useful ***
11-28-2012 07:26 AM
Hello,
Thanks for your answer. Our 3560-X has IP base image.
Is this configuration for the RSPAN filter on the single switch supported as well?
Best regards,
Vesna
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide