Hi,
Please could someone give me some guidance on the input queuing model on the WS-C3560CG-8PC-S switches? It seems that Cisco have reduced the configurable SRR Queues from 2 to 1 for this particular model though there is no documentation at all from Cisco (confirmed via a TAC case raised on the issue).
As a comparison, the WS-C3560C-8PC-S has an output for 'show mls qos input-queue' where as the WS-C3560CG-8PC-S does not have the command available.
WS-C3560C-8PC-S
C3560C#sh mls qos ?
aggregate-policer aggregate-policer keyword
input-queue input-queue keyword
interface interface keyword
maps maps keyword
queue-set queue-set keyword
vlan VLAN keyword
| Output modifiers
<cr>
C3560C#sh mls qos input-queue
Queue : 1 2
----------------------------------------------
buffers : 90 10
bandwidth : 70 30
priority : 0 30
threshold1: 80 100
threshold2: 90 100
C3560C(config)#mls qos srr-queue ?
input input keyword
output output keyword
WS-C3560CG-8PC-S
C3560CG#sh mls qos ?
aggregate-policer aggregate-policer keyword
interface interface keyword
maps maps keyword
queue-set queue-set keyword
vlan VLAN keyword
| Output modifiers
<cr>
CUR-SW05(config)#mls qos srr-queue ?
output output keyword
Several internet searches and Cisco Support and Community Forums have revealed nothing about this. Am I missing something obvious??
Thanks in advance,
David
