Hi All,
Can anyone make any sense of this or let me know where the magic version number is that this changed from supported to not supported?
3750-12S-CORE(config)#int po8
3750-12S-CORE(config-if)#no swi
3750-12S-CORE(config-if)#no switchport
3750-12S-CORE(config-if)#int po8.15
3750-12S-CORE(config-subif)#
3750-12S-CORE#sh ver
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
1 12 WS-C3750G-12S 12.2(25)SEB4 C3750-IPSERVICES-M
3750X-24P-E(config)#int po1
3750X-24P-E(config-if)#no swi
3750X-24P-E(config-if)#no switchport
3750X-24P-E(config-if)#int po1.15
^
% Invalid input detected at '^' marker.
3750X-24P-E(config)#
3750X-24P-E#sh ver
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
1 30 WS-C3750X-24P 15.0(1)SE3 C3750E-UNIVERSALK9-M
It doesn't work on 12.2(55) either.
Can't believe some moron changed it. I mean if nothing else it's a waste of resources. 6500 --> 3750 with PortChannel Subinterfaces = No Spanning Tree, 6500 --> 3750 without PortChannel Subinterfaces = SVI's = Spanning Tree. And no I can't avoid Subinterfaces as we are running VRF.
