05-14-2009 01:03 AM - edited 03-06-2019 05:43 AM
Hi,
I am looking to know RX and TX buffer size for 3750 swithces.
Does any know and can point to link ?
Regards,
Chintan
05-14-2009 02:27 AM
Hi,
You can check by running show interface. Explanation is under
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094791.shtml
ie in below example (taken from above link) input queue is 75 packets, output queue is WFQ 1000 packets.
router#show interfaces serial 0/0
...
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Or FIFO output queue is 40
router#show interfaces serial 0/0
...
Queueing strategy: fifo
Output queue :0/40 (size/max)
05-14-2009 03:00 AM
What you mentioned is software queue which is same even on 6500. I am looking for hardward Tx/Rx buffer value like in 6500 you have :
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide