02-14-2008 10:30 AM - edited 03-05-2019 09:09 PM
Hello,
I'd like to know if Cisco supports multiple images on a 3750 on stack
if it's supported we'd like to load
ip services on the core switches (2 switches)and ip based on the remaining switches 4
if that is supported could you please provide a link that will show us how to do you upgrade of the images on the stack
thank you
Solved! Go to Solution.
02-14-2008 10:39 AM
Chris
I do not believe that it is supported to do what you suggest in running different images of members of the stack. In the stack all members must run the same image. If a switch is not running the same image as the master then the switch will not become an active member of the stack.
HTH
Rick
02-14-2008 10:39 AM
Chris
I do not believe that it is supported to do what you suggest in running different images of members of the stack. In the stack all members must run the same image. If a switch is not running the same image as the master then the switch will not become an active member of the stack.
HTH
Rick
02-14-2008 10:43 AM
thank you very much for the prompt reply Rick
That's all I needed to know
02-14-2008 10:59 AM
Chris
I am glad that my answer was helpful. Thank you for using the rating system to indicate that your question was resolved (and thanks for the rating). It makes the forum more useful when people can read a question and can know that they will read a response that resolved the question.
The forum is an excellent place to learn about Cisco networking. I encourage you to continue your participation in the forum.
HTH
Rick
02-14-2008 12:12 PM
"I'd like to know if Cisco supports multiple images on a 3750 on stack "
Believe it is, but much depends on how the images differ.
"ip services on the core switches (2 switches)and ip based on the remaining switches 4
if that is supported "
Believe you could. You could flash each switch independently, and with compatible versions, stack them. Or you could flash one stack of two and one stack of four and join them. What's the problem, don't believe you can easily flash the combined stack of six and have two different images. (On-going upgrade headache.)
Below are two references to 3750 stack management.
PS:
Believe the rules of different feature sets within a stack are different for the 3750-E series.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide