07-25-2008 11:54 AM - edited 03-06-2019 12:28 AM
Someone deleted the IOS off the switch and power cycled the switch. Now it comes up with the prompt switch: and when I do a dir flash: it does not have an IOS image. How can I copy a image through the console? or can I?
Mike
Solved! Go to Solution.
07-25-2008 12:00 PM
Mike,
You can use xmodem to copy an IOS to the flash using your console cable. It is a pretty simple process, and quick if you change the baud rate to 115200. Here are some step by step instructions for your recovery.
Mark
07-25-2008 12:00 PM
Mike,
You can use xmodem to copy an IOS to the flash using your console cable. It is a pretty simple process, and quick if you change the baud rate to 115200. Here are some step by step instructions for your recovery.
Mark
07-25-2008 12:15 PM
Thank you....that is exactly what I was looking for.
Mike
07-28-2008 03:28 AM
Worked perfectly. Thanks for your help.
Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide