06-12-2007 03:21 PM - edited 03-05-2019 04:40 PM
I have a 3750 (WS-3750G-24TS) that I am trying to upgrade with no success thus far.
I ftp the image to the flash, verify the image successfully, and then reboot. On boot the image loads for a while then I get the "Error loading image:..." then it loads the old image. I've tried re-uploading the image several times. This worked fine on my other 3750.
I am running advipservices 12.2(25) and I am trying to upgrade to 12.2(37) advipservices.
Any reasons why a verified image would fail to boot?
Thanks,
Andrew
06-12-2007 03:32 PM
Hi Andrew,
You might want to check/set the boot path for the new image. Do a "show ver", "show boot" and "sh flash" to check and verify that you've the right image on flash.
hth,
hieu
06-13-2007 06:37 AM
Thanks, but I have already verified the boot path, and the image actually starts to decompress. ( Loading...@@@@@@@@) I get about 6 lines of "@" and then I get the error.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide