3750X network module question

[IT Services]

Good Afternoon,

We are looking to utilize the 10Gbe ports on our Network module we have in our Cisco 3750x switches.

We currently have a stack of 2 switches. We are looking to keep our 1 GBe uplinks in a Port-Channel to our core while servicing 10 GBe links for our dell Blade server network modules.

I know within the same module you cannot mix the 2 interfaces but how about within a switch stack? Can we have both uplinks on 1GBe on switch 1 and the 10 GBe links on switch 2? Yes i realize we lose switch level redundancy.

Thoughts?                 

[Joseph W. Doherty]

Disclaimer

The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

Can we have both uplinks on 1GBe on switch 1 and the 10 GBe links on switch 2? 

Sure.

I know within the same module you cannot mix the 2 interfaces but how about within a switch stack?

You can't use a gig and 10g in the same module pair (1,2 and 3,4) but you should be able to use gig in 1,2 and 10g in 4 or 10g in 2 and gig in 3,4.