cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1517
Views
0
Helpful
3
Replies

3850 10gig ethernet

john.wright
Level 3
Level 3

Does the 3850 model do 10gig copper?

If so, what is the full model number?

1 Accepted Solution

Accepted Solutions

You are right. You need two extra parts.You need to buy a NM module and a SFP separately.   NM module goes into one of 3850 slots and SFP goes inside NM module. Then you will able to plug your copper cable.

View solution in original post

3 Replies 3

WS-C3850-24XU       supports    NM:  C3850-NM-2-10G  and C3850-NM-4-10G

WS-C3850-12X48U    supports   NM:  C3850-NM-2-10G  and C3850-NM-4-10G

WS-C3850-12XS        supports   NM :C3850-NM-4-10G

WS-C3850-24XS        supports  NM: C3850-NM-4-10G

You need to get a proper NM for the switch and a 10G copper SFP

Switch plus a NM module plus SFP

 

when you see X in the model number, it supports 10G

Hope it helps,

Masoud

Masoud

If I understand correctly, it is not that you simply plug a cat 6 cable into an ether port that is 10g on the switch but you must insert the 10g copper sfp's into the port?

You are right. You need two extra parts.You need to buy a NM module and a SFP separately.   NM module goes into one of 3850 slots and SFP goes inside NM module. Then you will able to plug your copper cable.

Review Cisco Networking for a $25 gift card