11-18-2015 11:39 AM - edited 03-08-2019 02:45 AM
Hi guys,
The customer have a 3850 and a 3750 with QinQ configured. We have a problem with QinQ traffic that is in 3750 and your gateway is the 3850. All traffic pass through 3850 but QinQ traffic don't work. The catalyst 3850 is running 3.2.3 IOS XE.
11-18-2015 12:36 PM
Hello
sh l2protocol-tunnel interface gig1/0/7
sh system mtu
res
Paul
11-19-2015 03:01 PM
Hi Luis,
There's no much information in this post however there's a known bug in Cat3850 that might be causing this issue:
CSCuo84770 - 3850/3.3.2SE/Not forwarding double dot1Q tagged packets
Is there any chance for you to upgrade the code? You can also try a "ip device tracking maximum 0" int he interfaces connected to the Cat3750.
Regards.
- Omar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide