cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
607
Views
0
Helpful
0
Replies
Tuan Nguyen
Beginner

3850 Lanbase service-policy input

I could not apply service-policy input on an interface of 3850 lanbase but can apply service-policy output on an interface. Have no error but no show on configuration ? Software  version 03.02.02.SE. Is this the way it should be, no service-policy input ?

Thanks for any input

With AutoQos then it appear

interface GigabitEthernet1/0/19

description Connection to hq-3945-r g0/0

switchport access vlan 301

shutdown

trust device cisco-phone

auto qos voip cisco-phone

spanning-tree portfast

service-policy input AutoQos-4.0-CiscoPhone-Input-Policy

service-policy output AutoQos-4.0-Output-Policy

With another policy, it won't allow on input

Found it, I use the policy-map as Input-Policy, change it to something else as KH-Input-Policy and it works.

0 REPLIES 0