Hello,
I am trying to upgrade from 3750 to 3850. Following is my outbound WTD qos config on 3750:
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 1 2 4
mls qos srr-queue output cos-map queue 2 threshold 2 3
mls qos srr-queue output cos-map queue 2 threshold 3 6 7
mls qos srr-queue output cos-map queue 3 threshold 3 0
mls qos srr-queue output cos-map queue 4 threshold 3 1
mls qos srr-queue output dscp-map queue 1 threshold 3 46
mls qos srr-queue output dscp-map queue 2 threshold 1 16 18 20 22 32 34 36 38
mls qos srr-queue output dscp-map queue 2 threshold 2 24 26 28 30
mls qos srr-queue output dscp-map queue 2 threshold 3 48 56
mls qos srr-queue output dscp-map queue 3 threshold 3 0
mls qos srr-queue output dscp-map queue 4 threshold 1 8
mls qos srr-queue output dscp-map queue 4 threshold 3 4 10 12 14
mls qos queue-set output 1 threshold 2 70 80 100 100
mls qos queue-set output 1 threshold 4 40 100 100 100
What will be the equivalent config for the 3850? I am not able to find the right documentation for 3850.
Following is what I created but I believe it wouldnt handle WTD.
class-map match-any EF
match dscp ef
class-map match-any CS3AF41
match dscp cs3 af41
class-map match-any AF21
match dscp af21
class-map match-any AF11
match dscp af11
class-map match-any Default
match dscp default
policy-map QOS-OUTBOUND
class EF
priority level 1
class CS3AF41
priority level 2
class AF21
bandwidth remaining percent 20
shape average percent 100
class AF11
bandwidth remaining percent 20
shape average percent 100
class Default
bandwidth remaining percent 60
shape average percent 100
Also, when I try to apply this to an interface, it accepts it but its not visible under show runn. Am I missing anything?
I would appreciate any help with this.
Thank you.
