3850 switch stack

[Kanan Huseynli]

Hello cisco-lovers,

Can we mix different types of 3850,such as 48T (that means 48port UTP without any type of  PoE) and 24S (that means 24port SFT based) for switch stack?

We want to implement stackwise with two 3850-48T and two 3850-24S,but we have doubt whether it will make any problem or not.

In addition to,what is the impact of choosing Twisted Pair based switches OR SFP based switches for master/standby?

Thanks in advance,

[paul driver · Accepted solution]

Hello

It seems you can mix the switchs as long as the feature sets as the same ( Lan, IP,IP services base)

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/product_bulletin_c25-720777.html

res
Paul

[Kanan Huseynli]

Thanks Paul,

However,I didnt find any restriction yet,I wanted to make sure before buying them.It seems beside major release and feature set ,there is no any restriction.

If anyone still thinks ,it can make problem based on hands-on practice please feel free to write it here.

Regards,