QinQ on 2960-X/XR

[chris.russell]

Hi All

 Quick Q as feature navigator is a bit wooly on this ... are there are switches in the 2960X/XR range that support QinQ (ie: switchport mode dot1q-tunnel) and work ?

Ta

[Madhukrishnan Gopinathan Nair]

Hi Chris,

I just found the config guide for 2960 XR so it should be supported

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960xr/software/15-0_2_EX1/vlan/configuration_guide/b_vlan_152ex1_2960-xr_cg/b_vlan_152ex1_2960-xr_cg_chapter_0111.html

HTH

Madhu

[chris.russell]

Hi

 Thanks for coming back - yes this is what I've also read but have been told by a gold partner this only available on the 3560X upwards

 May hit C-NSP for a finite answer

Thanks

Chris

[Madhukrishnan Gopinathan Nair]

Sure, since we have a  Config guide, i would say YES to this.

I don't have a box with me to check now.

Thanks,

Madhu

[ปลาวาฬทราย RMUTT CPE IX]

My HTE told that:

- QinQ is not supported on 2960X .
- On 2960XR (iplite license) we support traditional QinQ but do not support selective QinQ.

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/54sg/configuration/guide/config/tunnel.html