cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Ask the Expert- SD-WAN

2131
Views
0
Helpful
2
Replies
Beginner

4331 ISR with Switch Module

I currently run 2911 routers with the integrated switch module.  I am going to be migrating to 4331 with the integrated switch module.  I am having some issues figuring out how to create VLAN's and SVI's.

Router(config)#vlan ?
  accounting  VLAN accounting configuration

Router(config)#int vlan 90
                    ^
% Invalid input detected at '^' marker.

Can you not create VLAN's and SVI's to use the backplane like you used to be able to on the 2911's?  I cant find any good documentation on Cisco's site one way or another.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Advocate

Hi Andy,

Hi Andy,

Looks like its getting harder to config on 4000s .

see this links from a brother in arms 

https://supportforums.cisco.com/discussion/12470821/configuring-sm-x-layer-23-etherswitch-service-module-4331-router

Regards

Alex

Regards, Alex. Please rate useful posts.
2 REPLIES 2
Highlighted
Advocate

Hi Andy,

Hi Andy,

Looks like its getting harder to config on 4000s .

see this links from a brother in arms 

https://supportforums.cisco.com/discussion/12470821/configuring-sm-x-layer-23-etherswitch-service-module-4331-router

Regards

Alex

Regards, Alex. Please rate useful posts.
Beginner

I talked with TAC today. 

I talked with TAC today.  They advised that the code has to be Cisco IOS XE Software, Version 03.15 and above.

If its 03.15 and above you can run the commands.  I upgraded the router and I know how the ability to run the commands. 

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards