cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1017
Views
4
Helpful
6
Replies

4503 module Compaitiblity in 4507 swtich

rao.mohsin
Level 1
Level 1

Below are the Moduls details of 4507 and 4503, We have two queries

A- If we add Ethernet module of 4503 switch in 4507 Switch, is it Compaitible

B- If we add 2  Ethernet module on 4503 in 4507 , because according to th data sheet there is provisioning of one extra module than what would be the effect on Switch performance...

show module all
Chassis Type : WS-C4507R

Power consumed by backplane : 40 Watts

Mod Ports Card Type                              Model     

       Serial No.
---+-----+--------------------------------------+-----------

-------+-----------
1     2  1000BaseX (GBIC) Supervisor(active)    WS-X4516  

       JAE0946PWPP
3     6  1000BaseX (GBIC)                       WS-X4306-GB

       JAE0948R1TC
4    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  JAE0948QV1U

M MAC addresses                    Hw  Fw           Sw    

         Status

Chassis Type : WS-C4503

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model     

       Serial No.
---+-----+--------------------------------------+-----------

-------+-----------
1     2  1000BaseX (GBIC) Supervisor(active)    WS-X4013+ 

       JAE0845ZJMU

2    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  JAB0844044V

3    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  JAB084403Z5

M MAC addresses                    Hw  Fw           Sw    

         Status

Regards,

Mohsin

6 Replies 6

Yes, you can use WS-X4548-GB-RJ45V module in both the switches.

for more info have a look into the below URL


http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea_ps4324_Products_Data_Sheet.html

Regards

Karuppu

Thanks Karuppu............

just to add to the original question.. Is possible to insert the new module in production environment without shutting down the switch?

Samreen

Hi,

Since cisco 4500 series will support hot swapable, you can.

Regards

Karuppu

Leo Laohoo
Hall of Fame
Hall of Fame

Can you be more specific?  How do you expect to add another blade into a 4503 when you already have two line cards in it?

We adding in 4507.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco