4503 module Compaitiblity in 4507 swtich

[rao.mohsin]

Below are the Moduls details of 4507 and 4503, We have two queries

A- If we add Ethernet module of 4503 switch in 4507 Switch, is it Compaitible

B- If we add 2  Ethernet module on 4503 in 4507 , because according to th data sheet there is provisioning of one extra module than what would be the effect on Switch performance...

show module all
Chassis Type : WS-C4507R

Power consumed by backplane : 40 Watts

Mod Ports Card Type                              Model     

       Serial No.
---+-----+--------------------------------------+-----------

-------+-----------
1     2  1000BaseX (GBIC) Supervisor(active)    WS-X4516  

       JAE0946PWPP
3     6  1000BaseX (GBIC)                       WS-X4306-GB

       JAE0948R1TC
4    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  JAE0948QV1U

M MAC addresses                    Hw  Fw           Sw    

         Status

Chassis Type : WS-C4503

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model     

       Serial No.
---+-----+--------------------------------------+-----------

-------+-----------
1     2  1000BaseX (GBIC) Supervisor(active)    WS-X4013+ 

       JAE0845ZJMU

2    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  JAB0844044V

3    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  JAB084403Z5

M MAC addresses                    Hw  Fw           Sw    

         Status

Regards,

Mohsin

[KARUPPUCHAMY MALAIYANDI]

Yes, you can use WS-X4548-GB-RJ45V module in both the switches.

for more info have a look into the below URL

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea_ps4324_Products_Data_Sheet.html

Regards

Karuppu

[rao.mohsin]

Thanks Karuppu............

[Samreen Fatima]

just to add to the original question.. Is possible to insert the new module in production environment without shutting down the switch?

Samreen

[KARUPPUCHAMY MALAIYANDI]

Hi,

Since cisco 4500 series will support hot swapable, you can.

Regards

Karuppu

[Leo Laohoo]

Can you be more specific?  How do you expect to add another blade into a 4503 when you already have two line cards in it?

[Samreen Fatima]

We adding in 4507.