4506-E kept showing error information about linux

[c1szhibin]

There's a 4506-E with supervisor ws-x45-sup7-e kept showing the following information (in red) over and over by console and all the interfaces are down.

Linux version 2.6.24.4.2.24.k10 (nburra@build-lnx-005) (gcc version 4.2.1 p1 (Cisco c4.2.1-p1)) #1 SMP Tue Jul 31 11:34:13 PDT 2012
EDAC MPC85xx MC0: Err Detect Register: 0x80000008
EDAC MPC85xx MC0: Captured Data / ECC:  0x2321202f_62696e2f / 0x77
EDAC MPC85xx MC0: Err addr: 0x78c58000
EDAC MPC85xx MC0: PFN: 0x00078c58

It seems like a problem about linux. I know nothing about linux. Can anyone provide me a solution to fix it?

[InayathUlla Sharieff]

The Sup module has gone faulty. Kindly get the RMA done.

HTH

Regards

Inayath

[InayathUlla Sharieff · Accepted solution]

In case you dont have Contract then you can try the following:-

Remove the Sup module from the chasis, and then Remove the Memory Card from it and put it back and then try to boot the module.

[c1szhibin]

I did. But it still kept showing those information.

[InayathUlla Sharieff · Accepted solution]

Thanks for the update. Now go ahead and raise the RMA for the Module thats the only option left .

Regards

Inayath.

*Please do not forget to rate the usefull posts.

[c1szhibin]

As I known, it's probably out of service for RMA.

[InayathUlla Sharieff]

Sorry to heard that. Now we have option to buy a new Card.

HTH

Regards

Inayath

**Please mark this thread as answered so that we close this topic rather than leaving as open question.

[c1szhibin]

Thank you very much for your reply.