FLLUTZMDF#config t
Enter configuration commands, one per line. End with CNTL/Z.
FLLUTZMDF(config)#int gig3/2
FLLUTZMDF(config-if)#mls qos trust ?
% Unrecognized command
FLLUTZMDF(config-if)#mls qos ?
% Unrecognized command
FLLUTZMDF(config-if)#mls ?
% Unrecognized command
FLLUTZMDF(config-if)#do sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 12.2(52)SG, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Tue 12-May-09 19:13 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x124CAD60
ROM: 12.2(44r)SG5
Darkside Revision 4, Jawa Revision 18, Tatooine Revision 140, Forerunner Revision 1.74
FLLUTZMDF uptime is 2 days, 50 minutes
System returned to ROM by power-on
System image file is "bootflash:cat4500e-ipbasek9-mz.122-52.SG.bin"
FLLUTZMDF(config-if)#
FLLUTZMDF(config-if)#do show run int gig3/2
Building configuration...
Current configuration : 97 bytes
!
interface GigabitEthernet3/2
description Link to CUBE router
switchport access vlan 333
end
FLLUTZMDF(config-if)#
