4507 Switch module compatibility

[neilrmessick]

I am trying to add a WS-X4648-RJ45V-E line card. Its comming up saying...

_CHASSIS-3-UNKNOWNLINECARD: Unknown module (Field Replaceable Unit minor type 36

7) in slot 7

looking online, it apperas that it should work. Any idea whats up? Running IOS15.0(2)SG7

NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4507R 7 slot switch "

PID: WS-C4507R         , VID: V06  , SN: FOX102001MR

NAME: "Clock Module", DESCR: "Clock Module"

PID: WS-X4K-CLOCK      , VID:      , SN: JAE10191N8H

NAME: "Mux Buffer 3 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590          , VID:      , SN: JAE10202NYW

NAME: "Mux Buffer 4 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590          , VID:      , SN: JAE10202NZ0

NAME: "Mux Buffer 5 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590          , VID:      , SN: JAE102138QX

NAME: "Mux Buffer 6 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590          , VID:      , SN: JAE102139KZ

NAME: "Mux Buffer 7 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590          , VID:      , SN: JAE10212VRN

NAME: "Linecard(slot 1)", DESCR: "Supervisor V-10GE with 2 10GE X2 ports, and 4

1000BaseX SFP ports"

PID: WS-X4516-10GE     , VID: V07  , SN: JAE1116DU90

NAME: "TenGigabitEthernet1/1", DESCR: "10Gbase-SR"

PID: X2-10GB-SR        , VID: V02  , SN: FNS11140SJW

NAME: "Linecard(slot 2)", DESCR: "Supervisor V-10GE with 2 10GE X2 ports, and 4

1000BaseX SFP ports"

PID: WS-X4516-10GE     , VID: V03  , SN: JAB1001002Z

NAME: "TenGigabitEthernet2/1", DESCR: "10Gbase-SR"

PID: X2-10GB-SR        , VID: V02  , SN: FNS11140SK5

NAME: "Linecard(slot 3)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 ba

seT ports"

PID: WS-X4548-GB-RJ45  , VID: V03  , SN: JAE10244CEK

NAME: "Linecard(slot 4)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 ba

seT ports"

PID: WS-X4548-GB-RJ45  , VID: V03  , SN: JAE10244CEQ

NAME: "Linecard(slot 5)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 ba

seT ports"

PID: WS-X4548-GB-RJ45  , VID: V03  , SN: JAE10244BTG

NAME: "Linecard(slot 6)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 ba

seT ports"

PID: WS-X4548-GB-RJ45  , VID: V03  , SN: JAE10244CDW

NAME: "Fan", DESCR: "FanTray"

PID: WS-X4597          , VID: V06  , SN: NWG101801N5

NAME: "Power Supply 1", DESCR: "Power Supply ( AC 1300W )"

PID: PWR-C45-1300ACV   , VID:      , SN: SON07060AC2

NAME: "Power Supply 2", DESCR: "Power Supply ( AC 1300W )"

PID: PWR-C45-1300ACV   , VID:      , SN: SON07180A19

[Leo Laohoo]

I am trying to add a WS-X4648-RJ45V-E line card. Its comming up saying

See the "E" at the end of the part number?  It means that you need a "-E" chassis.

[neilrmessick]

whats the proper part number for the POE blade? With all the variations of these chassis its really hard to turn up the right stuff on a google search.

[acampbell]

Neil

Go to this link:-

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea_ps4324_Products_Data_Sheet.html

Go down to the section

Cisco Catalyst 4500 Classic Line Cards

Cards to suit your set up are here

Regards,
Alex.
Please rate useful posts.

[glen.grant]

  You are correct if you are to believe the release notes for 15.02 .  Says it's supported on a non E chassis as long as it's 12.2.40 .  This was under non E chassis supported hardware.  Wonder if it's faulty ?  Also you only have 1300 watt supplies  might want to check to see if you have adequate power for the poe card.

WS-X4648-RJ45V-E

48 port 10/100/1000 Mb with 2 to 1 oversubscription

12.2(40)SG