Hi Switching Experts,
I got a continuous error pops up from logs as below.
%IPC-SW1_STBY-5-WATERMARK: 6580 messages pending in rcv for the port Card22/0:Request(3060000.C) seat 3080000
I found some discussion on this forum and the resolution is to reseat the module. But i couldn't relate the Card22/0 port is belong to which module. Can anyone help to relate this Card22/0 is belong to which module from my 6509? I will rate for helpful comments.
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 20 DCEF2T 4 port 40GE / 16 port 10GE WS-X6904-40G HIDE
2 20 DCEF2T 4 port 40GE / 16 port 10GE WS-X6904-40G HIDE
3 20 DCEF2T 4 port 40GE / 16 port 10GE WS-X6904-40G HIDE
4 20 DCEF2T 4 port 40GE / 16 port 10GE WS-X6904-40G HIDE
5 5 Supervisor Engine 2T 10GE w/ CTS (CSSO VS-SUP2T-10G HIDE
6 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G HIDE
7 20 DCEF2T 4 port 40GE / 16 port 10GE WS-X6904-40G HIDE
8 20 DCEF2T 4 port 40GE / 16 port 10GE WS-X6904-40G HIDE
9 48 CEF720 48 port 1000mb SFP WS-X6848-SFP HIDE
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Distributed Forwarding Card WS-F6K-DFC4-E HIDE 1.2 Ok
2 Distributed Forwarding Card WS-F6K-DFC4-E HIDE 1.2 Ok
3 Distributed Forwarding Card WS-F6K-DFC4-E HIDE 1.2 Ok
4 Distributed Forwarding Card WS-F6K-DFC4-E HIDE1.2 Ok
5 Policy Feature Card 4 VS-F6K-PFC4 HIDE2.1 Ok
5 CPU Daughterboard VS-F6K-MSFC5 HIDE 2.0 Ok
6 Policy Feature Card 4 VS-F6K-PFC4 HIDE 2.1 Ok
6 CPU Daughterboard VS-F6K-MSFC5 HIDE 2.0 Ok
7 Distributed Forwarding Card WS-F6K-DFC4-E HIDE 1.2 Ok
8 Distributed Forwarding Card WS-F6K-DFC4-E HIDE 1.2 Ok
9 Distributed Forwarding Card WS-F6K-DFC4-A HIDE 2.0 Ok
