10-22-2013 03:26 AM - edited 03-07-2019 04:10 PM
Hello All,
Bit confused with output of show flash and show boot where is actual image used why it says slot0 in Boot and show version has image
'bootflash:BTSYNC_cat6000-supk8.7-6-10.bin
----------------
(enable) sh flash
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. ffffffff bdfea4c9 a32d14 31 10431636 Jun 06 2005 13:48:47 BTSYNC_cat6000-supk8.7-6-10.bin
5559020 bytes available (10431764 bytes used)
EBRSW012> (enable)
----------------
(enable) sh boot
BOOT variable = bootflash:BTSYNC_cat6000-supk8.7-6-10.bin,1;slot0:ebrsw010\cat6000-supk8.7-6-10.bin,1;
10-22-2013 03:59 AM
Hi Amit,
Try the following:
clear boot system flash slot0:ebrsw010\cat6000-supk8.7-6-10.bin
Regards
Richard
10-22-2013 04:12 AM
Thansk Richard for reply please advise if this is service impacting command or only does refresh , also is there reboot required after this command ?
Regards
Amit
10-22-2013 04:17 AM
Hi Amit,
This command is not service impacting.
I just clear out the second (wrong) boot variable. After the command show boot should just show the correct bootflash: entry. A reboot isn't needed for that, but maybe you have to save the config to see the change under show boot.
Regards
Richard
10-22-2013 04:33 AM
Thanks Richard , It seems to be working One query so "bootflash" is just name of a name remane of name of image or or is it a directory
(enable) sh flash
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. ffffffff bdfea4c9 a32d14 9 10431636 Jun 14 2005 12:42:44 bootflash
5559020 bytes available (10431764 bytes used)
> (enable) sh boot
BOOT variable = bootflash:bootflash,1;
CONFIG_FILE variable = bootflash:switch.cfg
Configuration register is 0x2
ignore-config: disabled
auto-config: non-recurring, overwrite, sync disabled
ROMMON console baud: 9600
boot: image specified by the boot system commands
10-22-2013 04:36 AM
could you post the output of:
dir bootflash:
I think this should also work under catos.
Regards
Richard
10-22-2013 04:44 AM
Please find output below
> (enable) dir bootflash:
-#- -length- -----date/time------ name
1 10431636 Jun 14 2005 12:42:44 bootflash
5559020 bytes available (10431764 bytes used)
10-22-2013 04:46 AM
Is this a different device?
what is the output of
dir bootflash:bootflash/
10-22-2013 05:18 AM
hello Richard ,
Yes its different switch , please find output below
(enable) dir bootflash:bootflash/
No such file
If any one can reply please
10-24-2013 01:06 AM
Hello ,
If anyone can help please
Regards
amit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide