04-08-2011 08:52 AM - edited 03-06-2019 04:31 PM
Hello,
I have upgraded my 6509E to a new IOS version and delete the old one, after reboot, it enter the rommon mode, but the terrible thing is, there is no any tftp command, how can I upload an IOS in it? Please help, thanks!!!
04-08-2011 09:01 AM
Hi,
What type of supervisor you have? Could you share the output o the boot up process the device is doing? This will help to identify if the 6500 is in the SP or RP rommon.
04-08-2011 09:05 AM
did you have any boot system commands? or change them to point to the new ios?
at rommon if you type >set
what is the output?
check the commands in rommon. there is one to show you the ios (if it uploaded correctly) in the bootflash. you can then just type
> boot
then make sure you have your boot system commands correct!
04-08-2011 09:44 PM
If you have either Sup32 or Sup720 you can load the correct IOS into a CF.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: