02-11-2014 03:56 AM - edited 03-07-2019 06:07 PM
Hi all,
I have cisco router 827 and it is working that have interface ethernet0 which workes on 10M/half duplex and the problem i configure it to 100M/Full duplex.
Note that the system software is (C820-K9OSY6-M), Version 12.3(26)
Thanks
02-11-2014 03:59 AM
Hi all,
I have cisco router 827 which has one interface ethernet0 workes on 10M/half duplex and the problem i cant configure it to 100M/Full duplex.
Note that the system software is (C820-K9OSY6-M), Version 12.3(26)
Thanks
02-11-2014 04:15 AM
Hi,
it depends on what is on the oposite side of your router and then decide if you can configure your interface to 100M/full duplex.
If you configure ethernet0 to duplex auto and speed auto so what is result?
Regards,
Jan
02-11-2014 05:15 AM
thanks Jan ,
there is no speed or duplex commands under (interface ethernet 0) ,is it posssible
02-11-2014 05:34 AM
Hi,
regarding of the software version it would be possible. But regarding of hardware i think it is not. So if you want to use greater speed you will have to replace your current router with newer model.
Regards,
Jan
02-11-2014 06:21 AM
Thanks Jan for your help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide