Hi all. I am unsure of how to use the IOS CLI to configure a guest Wi-Fi netweork where it co-exists with an existing internal-only company Wi-Fi on the same router. I have the internal Wi-Fi set up, but ideally would like to have a guest Wi-Fi access point that provides a separate IP address subnet, like 192.168.1.0 instead of the company 192.168.0.0/24 network, and be isolated from contacting anything on the 192.168.0.0 network, yet still connect to the Internet connection that the 891W router uses.
Is this possible with IOS 15.2 on the 891W Integrated Services Router?
So right now we have:
192.168.0.0/24
DHCP set up and an internal AP set to bridge to this network.
Default Gateway is 192.168.0.1 .
WAN port on the 891W has a static IP given by the ISP and this then connects by CAT6 cable to the ISP's on-premises device. I am fine with using the same WAN IP, I only want to keep the guest-connected systems from doing anything with the internal company systems.
Thank you!
