9300 stacking

[adamgibs7]

Dears

I am proposing for small organization  a stack of 8 x 9200L-48P-4X  and on the switch Core 9300-48P-E  to cover the users on that floor, hence this is a accommodation dormitory so i am not expecting much traffic but is it the good design becz 9200L switching capacity is 176 Gbps and for 9300-48P is 256 Gbps or i should propose C9300-48UXM which is 580Gbps.

Also i would like to know the switching capacity with stacking what does it mean for example lets take 9200L when i connect 2 no's of 9200L switches the switching capacity will increase from 176Gb to 256Gb

Please elaborate more.

Thanks 

[Reza Sharifi]

Hi,

Have a look at this document. See figure-5 and 6 for stacking bandwidth.

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-stackwise-architecture-cte-en.html#_Toc13521185

HTH