Access a server connected on one interface from a host on another

[mf9769]

Hello all

Bit new at this, but I've successfully installed and configured a an ASA 5525x to get the WS on my inside interface to connect to the internet, as well as allow outside access to several servers inside my network. Now, however, I'm running into an issue. 

I've decided to give the new VOIP system we have its own interface on the ASA. I'm able to access the PBX from outside via a static public IP. However, I can't access it from any workstation on my Inside interface. Not sure how to get that working.

Let me know any additional information I should provide. Thanks.

[Georg Pauwen · Accepted solution]

Hello,

make sure you have:

same-security-traffic permit inter-interface

configured on your ASA. If that doesn't t resolve the issue, post the full configuration you have...

[mf9769]

Hah. That worked. Thanks.

Just to be clear as I’m somewhat new to this: that command permits traffic between all interfaces at the same security level, correct?

[Georg Pauwen]

Exactly !