03-17-2013 08:32 AM - edited 03-07-2019 12:17 PM
i have one SF300-24p switch where i setup some Vlans and echolife hg8245 ONT router to access internet. the diagram is the following
VLAN1 (Subnet of users) -----> Switch SF300-24p
VLAN2 (Subnet of users) -----> Switch SF300-24p
VLAN3 (HG8245) -----> Switch SF300-24p
VLAN4 (Servers) -----> Switch SF300-24p
i want to control access to internet on VLAN1 and VLAN2 (access on VLAN3), while providing access to VLAN4.
My problem is in connecting to internet, i can't find a way to "route back traffic to VLANs 1 and 2 since HG8245 don't seem to provide proper static routing ON LAN interface.
Is there a solution for my case ? Maybe without resorting to changing the HG8245 router ?
Thanks
Solved! Go to Solution.
03-17-2013 09:25 AM
Hello,
The only way I can see to accomplish this would be using NAT on the Switch when going to the outside world., so the HG8245 would send the packets back to the Switch whether the source was Vlan 1 or vlan 2
Regards,
Julio Carvajal
Rate all of the helpful posts
03-17-2013 09:25 AM
Hello,
The only way I can see to accomplish this would be using NAT on the Switch when going to the outside world., so the HG8245 would send the packets back to the Switch whether the source was Vlan 1 or vlan 2
Regards,
Julio Carvajal
Rate all of the helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide