Hello,
I am exploring options to assign access ports membership based on outer and inner tag. I am trying to achieve an architecture where the [outer tag and the inner tag] defines the broadcast domain membership of the access ports.
to give an example, the outer tag + inner tag combination of 10+100 will only forward layer 2 traffic to ports 1 and 2 where as outer tag + inner tag combination of 10+200 will forward layer 2 traffic to port 3 only. This way a broadcast frame for customer#1 on outer+inner tag 10+100 will not be forwarded to 10+200.
Frames on the access ports can be sigle tagged on not tagged at all.
Any help will be much appreciated. for switching I am using 4500X. please see the schematic attached.