04-12-2017 05:40 AM - edited 03-08-2019 10:10 AM
Hello,
We have an old site with about half a dozen switches (2960s, 3750s), and they they have an access list for SSH. Now this access list blocks us because it wasn't updated before we removed the subnet where the servers lived (office move).
Anyway I've manged to use the console cable and update the core switch there, but the other switches are in locations which are physically impossible to get to without planned downtime.
Can I somehow use the L3 core switch to SSH to them, perhaps create the VLAN that had access and then use this as a source SSH session?
If not I will have to recreate the subnet again an populate the subnet out to the MPLS.
Thanks
04-12-2017 05:54 AM
Hi
Try with the following linen from the core switch, but the IP of management of the core switch should be included on the ACL
ssh -l <username> <ip address of the switches>
04-12-2017 05:56 AM
Already tried that and it didn't work.
I guess it's a physical visit or I create the VLAN again?
04-12-2017 06:04 AM
Yeap it should work, creating the vlan again. Or maybe someone can connect a laptop to console to modify the ACL. Or visit the remote site and modify the ACL.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide