05-24-2011 11:12 AM - edited 03-07-2019 12:39 AM
I want to add vlan 708 to an existing port channel. I know I have to add it to both ends of the port channel.
This is the existing config.
switchport trunk native vlan 854
switchport trunk allowed vlan 801,803,804,806,807,827,832,842,854,870,872,892
switchport trunk allowed vlan add 896,1810,2700
Should I use "switchport trunk allowed vlan add 708, or do I have to use switchport trunk allowed vlan add 896,1810,2700,708. Seems like if I use just the add 708 version the vlans that are already on the add statement will be on the allwoed vlan line?
Thanks
05-24-2011 11:25 AM
switchport trunk allowed vlan add 708 will do the job.
HTH,
jerry
05-24-2011 11:26 AM
You are correct. Adding 708 will work.
05-24-2011 11:37 AM
Thanks Guys.
That is what I thought but I wanted to be sure since it is a production switch and I rarely do these.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide