cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2631
Views
5
Helpful
2
Replies

Adding 3750X to 3750G Stack

scottsassin
Level 1
Level 1

Our customer has a stack of 6 3750G switches.  They want to add another switch to the stack.  I tried to quote another G, but I got a warning that the G series is EOS January 30,2013.  Can I add a 3750X to the stack?  I know that no matter what switch I get, I will have to upgrade the IOS in the stack, as the stack is running 12.2(25)SEE2. 

2 Replies 2

rsimoni
Cisco Employee
Cisco Employee

Hi Scott,

yes you can mix 3750G with 3750X switches in a switch stack.

As you correctly pointed out all switches must be in the same IOS release. For the 3750x there is another gotcha as well. By defaulft it comes with a universal image and a LANBASE feature set enabled. If you are on ipbase on the 3750g you also need to buy a ipbase license for the 3750x or else it won't stack with the existing switches.

Please rate this answer if useful.

Riccardo

Leo Laohoo
Hall of Fame
Hall of Fame

The "highest" IOS a 3750 with 16 Mb of flash memory can go is the 12.2(55)SE and later.

You will not be able to load 12.2(58)SE and/or 15.0(1)SE.

Review Cisco Networking products for a $25 gift card