Preparing to create a new VDC environment on Nexus 7010 dual Sup-1, NX-OS 6.2(12)
We currently have 1 unused VDC, Would like to perform some pre-VDC environment checks to ensure adequate system resources are available. We also have the correct unallocated interfaces available for this VDC (Keepalive link, vPC link, and 2 FEX uplink ports.
Can anyone that knows the N7K pretty well offer any advice?
Thanks Frank
Show version:
Software
BIOS: version 3.22.0
kickstart: version 6.2(12)
system: version 6.2(12)
BIOS compile time: 02/20/10
kickstart image file is: bootflash:///n7000-s1-kickstart.6.2.12.bin
kickstart compile time: 12/3/2014 18:00:00 [02/02/2015 21:13:52]
system image file is: bootflash:///n7000-s1-dk9.6.2.12.bin
system compile time: 12/3/2014 18:00:00 [02/02/2015 22:42:56]
Hardware
cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor Module-1X")
Intel(R) Xeon(R) CPU with 8260668 kB of memory.
Processor Board ID JAF1528BCBA
Device name: PHN_NX7K_A
bootflash: 2048256 kB
slot0: 0 kB (expansion flash)
Kernel uptime is 230 day(s), 20 hour(s), 15 minute(s), 4 second(s)
--snip--
