07-08-2010 06:43 AM - edited 03-06-2019 11:57 AM
I have to standardize all of our switches and routers and some of them
have username and login password right after the banner and some of
don't. what commands can i use to make all of them ask for a username
and password.I have an example below of what i'm talking about
attached below.The example is what i want all the switches to look like
Solved! Go to Solution.
07-08-2010 08:12 AM
Hi Scooter
Try the following command:
username admin privelege 15 password PASSWORD
Then apply the login local command to the VTY lines and console line:
line vty 0 4
login local
Hope this helps,
Jonathan
07-08-2010 08:12 AM
Hi Scooter
Try the following command:
username admin privelege 15 password PASSWORD
Then apply the login local command to the VTY lines and console line:
line vty 0 4
login local
Hope this helps,
Jonathan
07-08-2010 08:32 AM
Worked like a charm thanks a million
07-08-2010 03:51 PM
Scooter817
Would you not consider using AAA on your switches (if this is possible), to reduce the admin overhead? Use RADIUS or TACACS, makes it much easier to administer a big group of switches? With a local login as a fallback?
I use this method in my environment. We make use of the full AAA model, and can report on connectivity, etc.
Very easy to implement.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide