04-08-2019 12:06 AM
I have a customer issue with the ATM and Di1 interfaces keep flapping and when I looked at the log it says Configured from console by mypwd on vty0
I have attached the log below:
.Apr 8 16:03:20.055 AEST: %LINK-5-CHANGED: Interface Dialer1, changed state to administratively down
.Apr 8 16:03:20.079 AEST: %LINK-5-CHANGED: Interface ATM0/2/0, changed state to administratively down
.Apr 8 16:03:21.079 AEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0/2/0, changed state to down
.Apr 8 16:03:27.999 AEST: %TRACKING-5-STATE: 2 interface Di1 ip routing Up->Down
.Apr 8 16:03:28.707 AEST: %SYS-5-CONFIG_I: Configured from console by mypwd on vty0 (EEM:bounce_interface_no_shut)
I have checked the upstream provider and they do not see any issues over the link. Please help
Solved! Go to Solution.
04-12-2019 12:14 AM
04-12-2019 12:42 AM
04-12-2019 01:28 AM
04-14-2019 05:01 PM
04-15-2019 12:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide