Hi I am getting alarms for high memory Utilization of switch. Please provide solution.
SWitch#sh memory
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor 314D670 67995844 40981268 27014576 25484392 16768820
I/O 6200000 14680064 12356464 2323600 1357012 2285744
Driver te 2000000 1048576 44 1048532 1048532 1048532
Switch#sh ver
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(1)SE3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 30-May-12 14:35 by prod_rel_team
ROM: Bootstrap program is Alpha board boot loader
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWARE (fc1)
Switch uptime is 24 weeks, 6 days, 16 hours, 50 minutes
System returned to ROM by power-on
System restarted at 15:16:13 UTC Fri Nov 2 2012
System image file is "flash:/c2960s-universalk9-mz.150-1.SE3/c2960s-universalk9-mz.150-1.SE3.bin"
Switch#sh switch
Switch/Stack Mac Address : ***************
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1 Master *************** 15 1 Ready
2 Member *************** 10 1 Ready
3 Member 0*************** 5 1 Ready
