09-23-2013 10:39 PM - edited 03-07-2019 03:38 PM
Hi,
I have a stack of 2 x C3750X. I noticed that when from the output of "show inventory" command, all power supplies does not appear? Only three of them can be seen instead of four. When I checked on the switches physically, all power supplies are up and running. But when I do a "show env all" all four power supplies can be seen. Is it really like that in "show inventory"?
09-27-2013 04:58 AM
This is is known cosmetic bug. 12.2(58)SE have permanent fix. Upgrade to the fixed version you wont see the issue again.
Thanks,
Richard.
*Rate if its useful
04-08-2014 07:31 AM
Hi Richard
I have WS-C3560E-12SD-E series switches with IOS (3560e-universalk9-mz.12.2.53.SE1) having two supplies (C3K-PWR-300WAC) installed. I noticed
that only one power supply is showing in 'show env'. But i can see both the suplies in 'show inventory'. I checked the power supplies LED and all LEDs showing Green.
While i can see both power supplies in 'show env' & 'show inventory' on the same model (WS-C3560E-12SD-E) of switches running IOS 12.2.52.SE & 12.2.50.SE2
06-23-2014 03:43 AM
Hello Richard,
Looks like I've encountered this. What's the bug ID please?
Thanks
06-25-2014 06:45 AM
Hi Allan
CSCtf76684 (Only one power supply displayed in "show env all")
06-25-2014 07:50 AM
Thanks Farooq :-)
06-25-2014 08:52 AM
Dear Allan
Please rate if useful.
02-10-2015 12:16 PM
I'm running 12.2(58)SE2 on some 3750X switches and I'm seeing the opposite cosmetic bug.
"show inventory" only has one power supply listed for each of two stack members.
"show env power all" shows me both power supplies in the two stack members.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide