allocate FEX ports to different VDCs

[Mohamed ElHoussini]

we have F348xp and going to associate FEX2248TP-E to it.

we need to split FEX ports to different VDCs , is that compatible ?

[richdodson]

All documentation points to no, it's not possible

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/white_paper_c11-701112.html

●   On the Cisco Nexus 2000 Series Fabric Extenders (FEX modules) connected to the Cisco Nexus 7000 Series Switches, all interfaces must be assigned to the same VDC, as shown in Figure 9.