allow teamviewer trough zone based firewall router 1941

[bennyPeoples]

I want to allow teamviewer.

following zones are already in there:

LAN with G0/0.1, G0/0.10 G0/0.20 and G0/0.30

WAN with G0/1

VPN

DMZ

anyone who can show me how to do this?

[joselgo2]

Hello Benny!

You could  try to use an ACL to allow the traffic over the interfaces, the typical ports that used for teamviewer are 5938, 443 and 80.

And if you have a issue with the vpn you can try sysopt connection permit-vpn.

Here is the command reference:

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/s8.html#wp1412217

Greetings!